Dual Axis-solar Radiation Tracking (DART) Racking is superior at Generating Energy than all other Solar Racking types, all DART units come standard with REI Radiation Tracking controller, Anemometer (Wind Sensor), and Safety Stop Sensors.

Order Our DART-8 units, or for Hi-Energy Consumers Order our DART-16 unit.

DART units start Generating Energy from as early as 5:45am ~ 8:30pm, commonly =10+ hours of Peak Generation in Sunlight per Day, and the Further South of the Equator you live, the more Energy a DART unit will Generate !

(*) /p = "Peak Energy", in other words the Solar Panels are exposed to Full Sunlight all day.

A DART-8 Unit Generates enough energy per day to make a large Residential or Semi-Commercial business energy independent, when incorporated with the correct sized Energy Storage.

2026 DART-8 Racking Design.

Without Foundation Pole.

With Foundation Pole.

DART-8 fitted with Customers own Solar Panels.

Racking been Assembled on the Ground, prior to being Lifting on to Double Slew Drive.

Main Mast and Double Flanged Foundation Poles.

Main Mast and Double Flanged Foundation Poles.

DART-8 fitted with Customers own Solar Panels.

Assembled Racking fitted with Customers smaller Solar Panels.

Assembled Racking.

Weatherproof Stainless Steel Control Housing.

DART-8 Specifications.

Vertical H-Beams Welded & ready for Galvanising.

Main Mast and Double Flanged Foundation Poles.

Racking Parts Welded & ready for Galvanising.

Testing assembly after Hot-Dipped Galvanising.

Solar Panel Racking Clamps.

Plywood Crate

Weight with Foundation Pole 760kg,

380cm x 93cm x 965cm (LDH)

NB: Below DART-8 is our OLD design with Linear Actuator & Inferior GPS Tracking.

These use the Old Inferior GPS Tracking System.

DART-8 Racking facing East at Sunrise.

DART-8 with high Mast, fitted with 440W Solar Panels.

NB The Control Housing must facing North.

Looking towards East/South.

Looking East, showing West Stop Magnet.

Extremely Over sized Concrete Foundation, Customer only had a 9 ton Excavator.

After Final pour of Concrete Foundation.

Two DART-8 with higher Mast.

Customers Fitted there own Solar Panels.

Customer used a Star picket at the bottom of the Foundation hole for Earth/Ground Spike.

Install with 30cm beneath bottom Foundation Flange reduces the chance of long term Rusting.

Final Concrete Pour above Re-bar.

Cemented block & double Flanged Foundation Pole design, with top flange set 30cm above Ground.

Customer used Re-bar around the Foundation Pole, providing a stronger Foundation.

The Rotation of a DART Racking.

For those looking to Dig or Auger a minimum 40cm Diameter Foundation Hole for a Double Flanged Foundation Pole, you should allow an additional depth of 30cm, to provide a 30cm Cement Bed below the bottom Flange Plate to take the vertical load of the DART.

It is advisable to install a Earth/Ground spike at the same time, old school would be a Re-bar or Star Picket.